Drylok Fast Plug Hydraulic & Anchoring Cement 1.81 kg. 917

Name: Drylok Fast Plug Hydraulic & Anchoring Cement 1.81 kg. 917
Brand: Drylok
SKU: 24716
Price: 27250 IQD
Availability: OutOfStock

No reviews yet• 274 Views •Tile Adhesive

27,250 IQD

Inclusive of VAT

Out Of Stock

Delivery Fees

5,000 IQD • arrives Sep 18

Free Returns

This item is eligible for free returns

Warranty guaranteed

Check the Osta warranty page

Specifications

Item Model Number917

Warranty & SupportCheck Osta Warranty Page

Special FeaturesA fast-setting hydraulic cement sets in just 3-5 minutes, preventing active or reoccurring water from flowing through cracks and holes in concrete and masonry structures. Clean-up: Soap and water Coverage: 16 In3 Easy mix, powder formula Sets in 3 to 5 minutes (temperature of water or admix controls set time) Use in waterproofing project to seal cracks, floor-wall joints, and utility entrance holes No top coat required CSI Masterformat® 03 01 00 Maintenance of Concrete CSI Masterformat® 03 15 13 Waterstops Surfaces :Concrete swimming pools, Basement floors, Drainage systems, Foundations, Elevator pits, Manholes, Sealing around concrete and masonry structures Application For active leaks (the presence of flowing water through a break in the surface): mix the appropriate amount of DRYLOK® Fast Plug®. In approximately 2-3 minutes, the mixture will become warm to the touch. This means it is beginning to set. At this time, force DRYLOK® Fast Plug® into the opening with the palm of your hand. Hold it in place for 3 – 5 minutes to ensure a complete set and bond sufficient enough to stop the flow of water. The patched area may be smoothed and trimmed to the surrounding area in approximately 5 minutes. DRYLOK® Fast Plug® may be painted when set with DRYLOK® Original Masonry Waterproofer , DRYLOK® Extreme Masonry Waterproofer, DRYLOK® Powdered Masonry Waterproofer or DRYLOK® Concrete Floor Paint. For Inactive Leaks, Patching, and Anchoring: thoroughly soak the area to be patched. This will prevent the surface from sucking the water out of the patching material. Apply DRYLOK® Fast Plug® with a putty knife or trowel. Use the surface to smooth the patch evenly. When anchoring, chisel or drill a hole in the masonry surface slightly larger than the item to be anchored. Make certain DRYLOK® Fast Plug® is tamped firmly into the hole and around any metal parts. Cancer hazard: Contains Crystalline Silica, which can cause cancer**. Preparation Wear eye protection, rubber gloves, and a dust mask when using DRYLOK® Fast Plug®. The area to be patched should be cleaned thoroughly by wire-brushing, scraping or any other effective process*. Back chisel out the area to be patched to the shape of an inverted “V” (the point at the surface). This allows the patch to expand and lock into the surface. Wet the area prior to patching to help DRYLOK® Fast Plug® cure properly. Both DRYLOK® Fast Plug® and water for mixing should be at room temperature. Mix 3 parts DRYLOK® Fast Plug® and 1 part water thoroughly until you achieve a putty or heavy troweling consistency. This mixture will set in 3 – 5 minutes. The use of colder water will retard the setting time. Mix only enough for immediate use due to the quick setting time. DRYLOK® Fast Plug® cannot be reworked once it has set. In cold weather, use warm (90°F) water for mixing; also, soak surface with warm water before application. Mix only enough for use in 3 minutes. Discard all leftover mixed patching material prior to starting a new batch. Leftover patching material will chemically react with new material in the mixing receptacle.

Return PolicyOsta Return Policy